|
|
|
|
| Application Chart |
Diagrams |
Application
Notes |
|
| 1986 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 1987 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 1988 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 1989 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 1990 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 1991 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 1992 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 1993 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 1994 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 1995 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 1996 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 1997 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 1998 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 1999 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 2000 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 2001 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 2002 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 2003 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 2004 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 2005 Suzuki RM 125 |
|
OEM: 50, Range: 48- 53 |
| 1982 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 1983 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 1984 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 1985 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 1986 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 1987 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 1988 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 1989 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 1990 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 1991 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 1992 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 1993 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 1994 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 1995 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 1996 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 1997 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 1998 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 1999 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 2000 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 2001 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 2002 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 2003 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 2004 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 2005 Suzuki RM 250 |
|
OEM: 49, Range: 48- 53 |
| 2005 Suzuki RMZ 450 |
|
OEM: 49, Range: 48- 53 |
|
|
|
|
|
|
|
|
|
|
| WARNING: Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations. |
|
| The Q&A on this Product |
|
|
| QUESTION: On a Suzuki rm125(2003), should a 114 link chain be used with a 50t rear sprocket? Thanks |
| ANSWER: 114 should work but a 116 will be better |
|
| QUESTION: On a 2003 rm 125, can an 11t front sprocket (or one lower tooth than stock) be used with the stock length chain? Thanks again! |
| ANSWER: we don;t recomend 11 tooth front sprocket it is very bad for the chain try and go up in the rear |
|
| QUESTION: on a 2002 rm125 can a stock length chain be used with a 51t or even a 52t rear sprocket? If not,what length chain is needed? thanks, ZK |
| ANSWER: no you will need a 114 |
|
| QUESTION: am having rm250 02 is there any different in h.p if i fix amr monster coil ? thanks |
| ANSWER: ????? |
|
| QUESTION: Hi. My 1996 RM125 loves to wheelie with a lot of bottom end power. Which sprocket combination is best to reduce wheeling? What is OEM? Thanks. |
| ANSWER: GO DOWN 2 TEETH IN THE REAR |
|
| QUESTION: Will a 2002 rm125 motor fit into a 1998 rm125 frame? |
| ANSWER: try |
|
| QUESTION: i have a 07 rmz250f with 13 front sprocket and 49 tooth rear, iwant to put a 52 tooth rear on, will this give me better corner exit speed? |
| ANSWER: yes it will |
|
| QUESTION: hello, can you please tell me if a 1985 rm 250 rear sprocket is a compatible fit with a new model? that is will a late model sprocket fit it? i believe the front does, but unsure of the rear, thankyou |
| ANSWER: a 1986 to2006 rm 250 sprocket will not fit your bike |
|
| QUESTION: i have 98 rm 250 i want bottom and mid, i ride a small track, what 2 sprockets should i use f\r. |
| ANSWER: 13-51 |
|
| QUESTION: how many teeth does a 1999 rm 125 have? |
| ANSWER: 12 FRONT 50 REAR |
|
| QUESTION: how fast will my rm125 1999 with aftermarket sprockets, chain, and pipe do? |
| ANSWER: 60-65 MPH TOPS |
|
| QUESTION: I HAVE A TRX 125 WITH A STOCK SPOCKET SET UP ,THE MOTOR HAS BEEN BUILT WITH A BIG BORE KIT ,I WANT MORE POWER & SPEED HOW SHOULD I GEAR IT FOR VERY AGGRESIVE TRAIL RIDING!!!P.S I HAVE A 50T SPOCKET THAT I THOUGHT ABOUT USEING TO GET MORE POWER IN 3RD GEAR SO I COULD GO UP HILLS FASTER??? |
| ANSWER: sorry but we don't nmake sprockets for that quad |
|
| QUESTION: I just got a 96 rm125 and i need to know how much oil to put in the bottom end(not in the gas) |
| ANSWER: it will say on the cover i think 800cc |
|
| QUESTION: i have a rm125 95 model it has a 12 tooth front sprocket and a 48 rear what is best for a small track? |
| ANSWER: i would say 12-48 but if spread out for you try a 49 or 50 rear |
|
| QUESTION: Im getting a suzuki RM125 and have lots of wide open feilds but some trails what sprocket size should I get? I normally race the neibors KFX400 and KDX220 in the feilds and just kinda go moderate speed or fast if the trails wide enough. |
| ANSWER: what year is your new bike? |
|
| QUESTION: Really having a hard time finding a pipe for my 85 RM-125 my manual says that anything from 84-86 will work fine. and my local dealer says they cant get. there must be somewhere. |
| ANSWER: please call customer service |
|
| QUESTION: i have a 97 rm 250 and i need to know the gas ratio can you help me out? |
| ANSWER: call any suzuki dealer |
|
| QUESTION: I own a '04 RM85, the front sprocket is a 14 tooth and the back is a 48 tooth what should i put on (sprocket size) for more bottom end power.
Thanks, Brent |
| ANSWER: 13 front |
|
| QUESTION: how fast will a rm85 do
|
| ANSWER: about 50-60mph |
|
| QUESTION: I have a 99 kx 250. I'm looking to run 13/52 sprockets. Will a 114 link chain still fit with the bigger rear sprocket? |
| ANSWER: NO IT WILL NOT YOU WILL NEED A 118 |
|
| QUESTION: whats the top speed of a 1987 yz250?? my front sprocket has 12 teeth and the rear has 53 teeth i want to go faster i ride trails what should i do ? |
| ANSWER: GO DOWN 2 IN THE REAR |
|
| QUESTION: I just got a 95 rm 125 and i noticed the gear oil is low is there a certain mixure to use |
| ANSWER: NO, JUST GEAR OIL |
|
| QUESTION: i am from Romania and I got a suzuki RM 125 made 1998 lot of power but on the forest especial on the tehnical steap section looks like no power , even if i kill the clutch rear spin or engine die , what do you think ? the power valve maybe the problem?( i use 13 front -52 rear , thank you. |
| ANSWER: ck your clutch |
|
| QUESTION: i have standard chain and sproket front and rear, i wont more pull out of corners should i up my front or rear sproket for this? if so,to what? |
| ANSWER: you should try a 51 rear |
|
| QUESTION: What front/rear sprocket setup would improve the low end power on my 1994 Suzuki RM125? Thanks |
| ANSWER: go up 2 in the rear |
|
| QUESTION: what is the top speed for my 2000 rm 125 |
| ANSWER: Should be around 67mph |
|
| QUESTION: My 03 RM 250 blows alot of oil by exhaust, people say is jetting problem, so what would be the best jetting set to make it burn clean? Thanks |
| ANSWER: please contact your dealer |
|
| QUESTION: Gas Ratio For Rm 125 Suzuki 2000 Dont HAve Owners Manule Anymore |
| ANSWER: please contact your suzuki dealer they will be more then happy to tell you
but if i remember corectly its 40:1 |
|
| QUESTION: 1994 RM125, whats the fuel/oil mixture? I am using 40:1, but I keep fouling plugs, the air fuel is set good, rich/lean, but I'm still fouliing plugs, is 40:1 the right mixture?? thank you..DC |
| ANSWER: check your compresion |
|
| QUESTION: what tank and plastics would fit my rm 250 1987 to make it look a bit newer..? |
| ANSWER: CHECK WITH YOUR SUZUKI DEALER |
|
| QUESTION: What is the stock torque and hoursepower of a 1993 Suzuki rm 125 ?? |
| ANSWER: please call your suzuki dealer. |
|
| QUESTION: what is the top speed of my suzuki rmz 250 2005?
many thanks |
| ANSWER: AROUND 65 MPH |
|
| QUESTION: Sry but i need some help i have a 2003 suzuki rm 125 and i need to know the gas to oil mixture? plz help me out thanks |
| ANSWER: please see your owners manuel last time i mixed was a long time ago or try to get a ratio rite cup |
|
| QUESTION: what is the approximate speed of my 2003 suzuki rm 125 |
| ANSWER: 65mph |
|
| QUESTION: top speed of RM125 2002? |
| ANSWER: around 65 mph |
|
| QUESTION: Im 15 and about to purchase my first bike. im looking forward to getting a 1991 suzuki rm 125. I was wondering wut different type of plastics i can get to make it look any newer and wut custom motor parts i can add to it to make it faster. thank you,
chris |
| ANSWER: yo ucan get a sprocket kit 13-52 call custome rservice when you are ready |
|
| QUESTION: How do i set the power valves on a RM 125 91 MODEL for best performance? |
| ANSWER: please contact your local dealer. |
|
| QUESTION: I Just broke My chain for my 2006 RMZ 450. I s there a blue or yellow chain and sproket avaialble and how many teeth should be on the rear sprocket. More VS Less?? |
| ANSWER: depends on what you do hwy or dirt hwy 16-39 dirt 15-48 as for the chain yes they are avialable. |
|
| QUESTION: I have a '03 rm125 and I have a 49 tooth sprocket on it...don't seem to be getting power quick enough on local outdoor track. I was thinking about getting a 52 tooth sprocket. Would that be a pretty good choice? The two local tracks here in central Texas have alot of jumps right out of turns and I have to ride the bike really hard to get any air off the jumps. I have a 12 tooth front sprocket. I have boysen reeds and full FmF exhaust. Just need to put the power to the dirt. What would you recommend? Thank you~ Eric |
| ANSWER: you can use the 52 but it will make the rear spin so you will have to modify your riding style and ride a taller gear. |
|
| QUESTION: Which should I get?Suzuki DR 250 or Honda CRF 230? Which performs better? Top speed? Acceleration? |
| ANSWER: ???? |
|
| QUESTION: what is the top speed of a ktm 550 |
| ANSWER: don't know |
|
| QUESTION: what is the top speed of my 1984 rm 250 |
| ANSWER: AROUND 65-70MPH |
|
| QUESTION: hi i have a Suzuki rm250 93 trying to make street legal but i cant for some reason get any power out of the meg to run my lites i was wondering if i could get some input or a better wiring digram |
| ANSWER: YOU WPULD HAVE TO GET A STRONGER STATOR CALL BAJA DESIGNS OR CHECK THE WESITE |
|
| QUESTION: i have a 2002 suzuki 125 RM wondering if a 48 or a 50 rear sprocet would be better? |
| ANSWER: depending on what you want out of the bike 48 will give you more top end speed the 50 will give you more tourqe. |
|
| QUESTION: Hi i have a 07 RMZ 250 and I was wondering if you guys could some how make me a blue sprocket? A rear 48T
Thank You..Trevor Espie 479 |
| ANSWER: we have it in stock just call customer service and they can order it for you |
|
| QUESTION: looking for a 46 tooth sprocket for a 2006 viva vx200sx enduro.also know as a hsun hs200gy. |
| ANSWER: SORRY NOTHING FOR THIS BIKE |
|
| QUESTION: Is this an aluminum sprocket? |
| ANSWER: yes it is |
|
| QUESTION: do you make this for suzuki RM 85 ? |
| ANSWER: only in steel |
|
| QUESTION: we need a rear sprocket for a 1992 suzuki TS200 R trail street bike...6 bolt pattern with 47 teeth..106 chain link...do u have any idea where we can get one...we live in new brunswick canada |
| ANSWER: i looked at all our application list and i can't find a ts 200 so i would say no but do you know of a more common bike that uses the same sprocket maybe check with you suzuki dealer we don't have this bike at the us so i don't know wwhat to tell you
DRIVEN RACING |
|
| QUESTION: IS THERE A REAR SPROCKET OF ABOUT 30 TEETH FOR A 428 CHAIN SIZE ? THIS IS FOR A CUSTOM SCOOTER. THANK YOU....MITCH |
| ANSWER: nothing this small sorry |
|
|
|
| Ask your question here: |
|
| Your email (so we can send you the answer): |
|
|
|
Event Photos
powered by
